SCOF vs DCOF: Which Slip Test Does Your Case Need?

Slip test results are reported as a coefficient of friction (COF). Under NFSI standards, two different measurements are used: static (SCOF) and dynamic (DCOF). They measure different things, so values from one method are not compared with values from the other.

What SCOF measures

The Static Coefficient of Friction (SCOF) measures the force required to start movement between a test surface and a floor. NFSI B101.1 covers wet SCOF testing.

What DCOF measures

The Dynamic Coefficient of Friction (DCOF) measures traction while a person is already in motion. NFSI B101.3 covers wet DCOF testing.

How the NFSI traction levels differ

Wet SCOF under NFSI B101.1:

  • High traction: 0.60 or higher

  • Moderate traction: 0.40 to 0.59

  • Low traction: below 0.40

Wet DCOF under NFSI B101.3:

  • High traction: 0.45 or higher on level surfaces and 0.50 or higher on ramps

  • Moderate traction: 0.30 to 0.44

  • Low traction: below 0.30

Which test fits your situation

The right method depends on the surface, the conditions and what the testing needs to show. Call (727) 477-4442 or email info@slippatrol.com and we will talk through your situation.

Related testing pages

Read more about slip resistance testing and walkway audits, floor coefficient of friction testing, wet DCOF testing and forensic slip testing for attorneys.