NFSI Traction Levels Explained

NFSI sorts measured walkway traction into three levels: High, Moderate and Low. The level depends on which test method was used and the number it produced. The numbers below come from NFSI's published B101 standards, so confirm them against the current edition before relying on them in a case.

Wet SCOF (static coefficient of friction), NFSI B101.1

  • High traction: 0.60 or higher

  • Moderate traction: 0.40 to 0.59

  • Low traction: below 0.40

Wet DCOF (dynamic coefficient of friction), NFSI B101.3

  • High traction: 0.45 or higher (0.50 or higher on ramps)

  • Moderate traction: 0.30 to 0.44

  • Low traction: below 0.30

What the two tests measure

SCOF describes the force needed to start a foot or shoe sliding across a surface. DCOF describes the resistance once the foot or shoe is already moving. They are different measurements, which is why a surface can be described differently by each test, and why a report should always say which method produced a number.

What a number does and does not tell you

A traction level describes how a measured surface performed under the test conditions on the day of testing. It is a measurement, not a conclusion about what caused a fall. Slip Patrol reports the measured results and the site conditions in a comprehensive written report, and our reports do not offer opinions.

Slip Patrol is a forensic walkway auditing and slip resistance testing firm in the Tampa Bay area. We test to NFSI B101.0, B101.1 and B101.3. Questions from attorneys are welcome at (727) 477-4442 or info@slippatrol.com.